Wifi IoT Project Module Esp-m2 With Ultra Small Size From Esp8285 Compatible With Esp8266 DIY

Description

Wifi IoT Project Module Esp-m2 With Ultra Small Size From Esp 8285 Compatible With Esp 8266 DIY  RC Toy Car DO IT

What is ESP8285?

ESP8285=ESP8266+1M Flash, the bearing high temperature is 125℃ (the one for ESP8266 is just 85℃). More important, the code programmed in ESP8266 can be used for ESP8285 intactly.

Introduction

• ESP-M2 is encapsulated by the high performance chip ESP8285, which is equal to ESP8266 chip plus 1M Flash. The chip ESP825 is encapsulated a advanced Tensilica’s L106 32-bit CPU, together with SRAM. ESP825 has the full and complete WiFi fuction, which can used independently and alsoused as a slaver with other Hoster MCU, which can start directly from the out-built Flash. In addition, the built-in high-speed buffer is benefit for the system performance. Especially, ESP8285 can be used as a WiFi adapter by SPI/SDIO and/or I2C/UART interface, when it is applied to the other MCU design.
• More details, please visit this github link to get the manual and tools, https://github.com/SmartArduino/SZDOITWiKi/wiki/ESP8285—ESP-M2

Features

• Ultra-small size;
• Support serial to WiFi;
• Wireless transparent transmission;
• Long distance transmission with ultra-low power;
• Bearing high temperature to 125 ℃, compared to the 85℃ for ESP8266.

Specifications

SOC characteristics

• Built-in Tensilica L106 ultra-low power 32-bit CPU, main frequency supports 80MHz and160MHz, and RTOS;
• Built-in TCP/IP protocol;
• Built-in one-channel 10-bit high precision ADC;
• Outboard interface: HSPI, UART, I2C, I2S, IR Remote Controk, PWM, GPIO;
• Deep sleep current is 10uA, the cut-off current is smaller than 5uA;
• Wake,connect and transmission data package within 2ms;
• The consume power is smaller 1.0Mw (DTIM3) when at stand by status;
• Built in 1M byte for SPI Flash.

WiFi characteristics

• Support 802.11 b/g/n/e/I;
• Support Station, Soft AP, Soft AP+STA mode;
• Support WiFi Direct (P2P);
• Support CCMP (CBC-MAC, computation mode), TKIP (MIC, RC4), WAPI (SMS4), WEP (RC4), CRC etc., for hardware acceleration.
• P2P finding, P2P GO mode/ GC mode and P2P power manage
• WPA/PA2PSK and WPS;
• 802.11 securitycertification: pre-certification and TSN
• Support 802.11n (2.4GHz);
• 802.1h/RFC1042 frame encapsulation;
• Support seam less roaming;
• Support AT remote update and cloud update (OTA);
• Support Smart Config function (including Android and Ios device).

Module interface

• 2* UART;
• 1*ADC;
• 1*En;
• 1*wakeup pin;
• 1*HSPI;
• 1*I2C;
• 1*I2S
• More than 10*GPIOs

Working temperature: -40℃-+125℃;

Module size:

• 12.3mm*15mm(For M1 module);
• 12.3*20mm(For M2 module).

Applications

• Electronical appliance;
• Smart power plug, smart light;
• Infant monitor;
• Sensor networks;
• Security ID label;
• Wireless location beacon;
• Home automation;
• Mesh networks;
• IP video camera;
• Wearable electronics;
• Wireless location recognition;
• Industrial wireless control

Module structure

Schematics for pin of module

Module size

Specifications

• ESP-M2 module: 30pcs